Hi again.
I'm using the battery calculator with default settings and this is my set of commands for the shell:
config -readint 60 -pubint 1200
sensor -interval 1.0 360
sensor -interval 2.5 360
sensor -interval 10.0 360
However, when I send the first line I get this:
23:58:12.422 -> config -readint 60 -pubint 1200
23:58:12.422 -> For now we can only store safely 3 set of readings on RAM memory, sorry.
23:58:12.422 -> Saved configuration on eeprom!!
23:58:12.422 -> -- New config --
23:58:12.422 -> Mode: network
23:58:12.422 -> Publish interval: 180
23:58:12.422 -> Reading interval: 60
It seems the publish interval is not touched at all? This worked before the firmware-update, now there seems to be an issue, either in the generator of the code or the firmware? Also, what means "we can only store safely 3 set of readings on RAM memory"? With intermittent wifi only the last 3 readings are kept in RAM and uploaded if wifi is again available?
For reference build version and stuff:
23:58:34.331 -> SCK > version
23:58:38.027 -> Hardware Version: 2.1
23:58:38.027 -> SAM Hardware ID: 6A5D85D250573738352E3120FF152342
23:58:38.027 -> SAM version: 0.9.7-1b30422
23:58:38.027 -> SAM build date: 2020-06-23T16:08:01Z
23:58:38.027 -> ESP MAC address: 3E:61:05:DF:C2:1E
23:58:38.027 -> ESP version: 0.9.2-a91f850
23:58:38.027 -> ESP build date: 2019-08-20T13:17:16Z
Hi again.
I'm using the battery calculator with default settings and this is my set of commands for the shell:
config -readint 60 -pubint 1200
sensor -interval 1.0 360
sensor -interval 2.5 360
sensor -interval 10.0 360
However, when I send the first line I get this:
23:58:12.422 -> config -readint 60 -pubint 1200
23:58:12.422 -> For now we can only store safely 3 set of readings on RAM memory, sorry.
23:58:12.422 -> Saved configuration on eeprom!!
23:58:12.422 -> -- New config --
23:58:12.422 -> Mode: network
23:58:12.422 -> Publish interval: 180
23:58:12.422 -> Reading interval: 60
It seems the publish interval is not touched at all? This worked before the firmware-update, now there seems to be an issue, either in the generator of the code or the firmware? Also, what means "we can only store safely 3 set of readings on RAM memory"? With intermittent wifi only the last 3 readings are kept in RAM and uploaded if wifi is again available?
For reference build version and stuff:
23:58:34.331 -> SCK > version
23:58:38.027 -> Hardware Version: 2.1
23:58:38.027 -> SAM Hardware ID: 6A5D85D250573738352E3120FF152342
23:58:38.027 -> SAM version: 0.9.7-1b30422
23:58:38.027 -> SAM build date: 2020-06-23T16:08:01Z
23:58:38.027 -> ESP MAC address: 3E:61:05:DF:C2:1E
23:58:38.027 -> ESP version: 0.9.2-a91f850
23:58:38.027 -> ESP build date: 2019-08-20T13:17:16Z